Suits:
- DISCOVERY 4 / LR4 3.0 2014-on
- DISCOVERY 4 / LR4 5.0 V8 2009-on
- RANGE ROVER III (L322) 4.4 TDV8 313 2010 > 2012
- RANGE ROVER III (L322) 5.0 V8 Supercharged 510 2009 > 2012
- RANGE ROVER IV (L405) 3.0 SDV6 Hybrid 275 2015 > 2017
- RANGE ROVER IV (L405) 3.0 SDV6 Hybrid 340 2013 > 2017
- RANGE ROVER IV (L405) 3.0 TDV6 258 2013 >
- RANGE ROVER IV (L405) 3.0 V6 340 2013 >
- RANGE ROVER IV (L405) 3.0 V6 380 2015 >
- RANGE ROVER IV (L405) 4.4 SDV8 339 2015 >
- RANGE ROVER IV (L405) 5.0 V8 Supercharged 510 2013 > 2017
- RANGE ROVER IV (L405) 5.0 V8 Supercharged 525 2017 >
- RANGE ROVER IV (L405) 5.0 V8 SVAutobiography 550 2015 > 2017
- RANGE ROVER IV (L405) 5.0 V8 SVAutobiography 566 2017 >
- RANGE ROVER SPORT I (L320) 5.0 V8 Supercharged 375 2009 > 2013
- RANGE ROVER SPORT I (L320) 5.0 V8 Supercharged 510 2009 > 2103
- RANGE ROVER SPORT II (L494) 3.0 l6 P400 400 2019 > AJ300
- RANGE ROVER SPORT II (L494) 3.0 SDV6 292 2013 > 2015
- RANGE ROVER SPORT II (L494) 3.0 SDV6 306 2015 >
- RANGE ROVER SPORT II (L494) 3.0 SDV6 Hybrid 340 2013 > 2015
- RANGE ROVER SPORT II (L494) 3.0 SDV6 Hybrid 354 2015 > 2017
- RANGE ROVER SPORT II (L494) 3.0 TDV6 258 2013 >
- RANGE ROVER SPORT II (L494) 3.0 V6 340 2013 > 2018
- RANGE ROVER SPORT II (L494) 3.0 V6 380 2015 > 2018
- RANGE ROVER SPORT II (L494) 4.4 SDV8 340 2014 >
- RANGE ROVER SPORT II (L494) 5.0 SVR 550 2014 > 2017
- RANGE ROVER SPORT II (L494) 5.0 SVR 575 2018 >
- RANGE ROVER SPORT II (L494) 5.0 V8 Supercharged 510 2013 > 2017
- RANGE ROVER SPORT II (L494) 5.0 V8 Supercharged 525 2018 >
The panel / cylindrical air filter is commonly referred to as a "replacement air filter". It is installed in the vehicle's original airbox to replace the OEM air filter. It is made of highly performing materials that allow an increased air flow combined with more efficient filtration, guaranteeing containment of all impurities from as small as 7 microns (compared to OEM's 10 microns).
Air flow chart for a sample BMC air filter against an OEM paper filter
Temperature 25C° - Humidity 25% - Pressure 1020mbar
The test ran with OEM airbox and the related air flow constrictions.
This chart has a pure illustrative purpose and does not refer to the present filter.
BMC air filters are produced using a "Full Moulding" system that enables the characteristic red filter to be realized from a single mould with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes.
BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.
All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit.
